Tungsten Carbide Industrial Knives

Ihe osise Tungsten Carbide arụpụtara arụpụtara

Nkọwa dị mkpirikpi:

Ihe: Carbide siri ike;Tungsten Carbide & ígwè

Nha ọka: Ultrafine, Submicron, Ọma, Ọkara, Ọkpụkpụ

Ụdị: Gburugburu, Square, mgbagwoju anya dị ka eserese ma ọ bụ sample

Aha ndị ọzọ: Cnives Carbide Industrial, Tungsten Carbide Cutting Knives, Cemented Carbide Plastic Film Cutting Knife, Carbide Paper Cutting Blade

Mma alloy welded na mma alloy siri ike dị.

Zitere anyị email

Nkọwa ngwaahịa

Nkọwa

Tungsten carbide ulo oru mma na agụba nke siri ike ma na-eyi nguzogide, nha na ọkwa ahaziri anabata.Nke etinyere n'ọrụ n'ọtụtụ ụlọ ọrụ, dị ka nkwakọ ngwaahịa, batrị Li-ion, nhazi ígwè, imegharị ihe, ọgwụgwọ ahụike na ihe ndị ọzọ.

Atụmatụ

• Ihe mbụ tungsten carbide
• nkenke machining & Ogo nkwa
• Debe agụba dị nkọ maka ịdịte aka na-adịte aka
• Ọrụ ụlọ ọrụ ọkachamara na ngwaahịa dị ọnụ ahịa
• nha na akara ule dị iche iche maka ngwa ọ bụla

Ọkwa nke TUNGSTEN CARBIDE KNIVE na agụba

Ọkwa	Nha ọka	Co%	Isi ike (HRA)	Njupụta (g/cm3)	TRS (N/mm2)	Ngwa
UCR06	Ultrafine	6	93.5	14.7	2400	Ultrafine alloy ọkwa na High ike ike na-eyi resistance.Suitable maka iche iche nke eyi akụkụ-eme, ma ọ bụ elu nkenke ulo oru ọnwụ ngwaọrụ n'okpuru ala mmetụta ọnọdụ.
UCR12	Ultrafine	12	92.7	14.1	3800
SCR06	Submicron	6	92.9	14.9	2400	Submicron alloy ọkwa na High hardness na eyi resistance.Suitable maka iche iche nke eyi akụkụ-eme, ma ọ bụ elu eyi iguzogide ulo oru ọnwụ ngwaọrụ n'okpuru ala mmetụta ọnọdụ.
SCR08		8	92.5	14.7	2600
SCR10		10	91.7	14.4	3200	Submicron alloy ọkwa na High hardness na High toughness, Kwesịrị ekwesị maka dị iche iche ubi Industrial slitting ngwa.Dị ka akwụkwọ, ákwà, ihe nkiri, non ferrous ọla wdg.
SCR15		15	90.1	13.9	3200
MCR06	Ọkara	6	91	14.9	2400	Ọkara alloy ọkwa na High hardness na-eyi resistance.Dabara maka ulo oru igbutu na-etipịa ngwá ọrụ n'okpuru ala mmetụta ọnọdụ.
MCR08		8	90	14.6	2000
MCR09		9	89.8	14.5	2800
MCR15		15	87.5	14.1	3000	Ọkara alloy ọkara na High toughness.Dabara maka ịkpụ ụlọ ọrụ mmepụta ihe na ịkụpịa ngwaọrụ n'okpuru ọnọdụ mmetụta dị elu.Ọ nwere ezigbo ike na mmetụta nguzogide.

Ngwaahịa ndị ọzọ nwere ike ịmasị gị

Ọpụrụiche Carbide ahaziri

Plastic Carbide na mma rọba

Carbide Plastic Film Ịcha mma

Mma na-akpachapụ anya Carbide

Mma Carbide Square Cemented

Carbide Strip Blade nwere oghere

Adantage

• N'ime afọ 15 n'ichepụta ahụmịhe na akụrụngwa na teknụzụ dị elu.

• elu corrosion & okpomọkụ na-eguzogide;Magburu onwe mbepụ mmetụta ogologo ọrụ ndụ.

• Elu nkenke, igbutu ngwa ngwa, ịdịte aka na arụmọrụ Stable.

• Igwe na-egbuke egbuke n'elu;Gafere ọkọlọtọ ezigbo mbelata obere oge nkwụsị.

Ngwa

Tungsten carbide mma na agụba maka ịkpụ na perforation na mbukota, ịkpụ, na perforating igwe na ọtụtụ igwe ndị ọzọ eji na nri, ọgwụ, akwụkwọ, typographic, akwụkwọ, ụtaba, textile, osisi, ngwá ụlọ, na metal ụlọ ọrụ, n'etiti ọtụtụ ndị ọzọ.